Choose the file by what you want to do. An SVG adds artwork to a project, an LBRN2 opens a saved LightBurn project, and a CLB loads a library of material settings. Start by extracting the ZIP you downloaded.
To add artwork, import the SVG
In LightBurn, choose File → Import and select the SVG. Check the imported width and height against your blank before placing the design. If several designs appear on one sheet, select the motif you want and save a working copy.
For example, the 18 Coin Engraving Bundle contains the same 18 designs in SVG, AI and EPS. Start with the SVG in LightBurn. The three files are alternate versions of the same sheet.
To open a saved project, use the LBRN2
Choose File → Open to load the saved project and its layers. LightBurn can also import the artwork from a project into another document. Opening the project preserves the saved project settings. Review the layer operations and dimensions for your machine and material before running a job.
To load material settings, use the CLB
Open the Material Library panel, choose Load, and select the CLB supplied for your setup. This adds material presets to the library. Use a suitable test piece to check a preset on your machine. The LightBurn settings collection lists the setups included in each package.
Before you buy
Check the listing for its supplied formats, dimensions or sizing notes, and usage terms. If you already purchased a file, the digital delivery guide explains how to find the download and extract the ZIP.
For the software steps, see LightBurn’s file management and material library guides.